Installation issue with Control-M FORECAST 6.2.01

Everything about Control-M Forecast
Post Reply
User avatar
fyot
Nouveau
Nouveau
Posts: 734
Joined: 26 Apr 2005 12:00
Location: PARIS
Contact:

Installation issue with Control-M FORECAST 6.2.01

Post by fyot » 23 May 2006 11:46

If you want to install Control-M FORECAST under Windows with Control-EM 6.2.01 you could have an issue.

Control-M FORECAST need Control-EM 6.2.01 and Service Pack 1.
So if you installed Control-EM 6.2.01 and Service Pack 2 and try to install Control-M FORECAST after, you will received error message asking
"Control-EM 6.2.01 with Service Pack 1 required"

If you want to install correctly Control-M FORECAST with Control-EM and ServicePack 2, you need to install using the following steps :

- Install basic version of Control-EM 6.2.01
- Install Control-M FORECAST Product
- Install Service Pack 2 or higher of Control-EM 6.2.01

User avatar
Veseli
Nouveau
Nouveau
Posts: 7
Joined: 23 Feb 2007 12:00
Location: Zagreb, Croatia

Post by Veseli » 28 Feb 2007 4:27

Hello ppl,

I just want to add a little tip.
I tried to install Forecst 6.2.01 on VMware Win2003Server machine, but even I put FixPack2 it didn't work out till I didn't made following change:
* Turn on CONTROL-M/Forecast.
1. Open the Administration Facility
2. Login as the EMUSER account.
3. Locate the parameter "BMCInternalUseFrc01" parameter
4. Set the value of this parameter to "2675" to turn on CONTROL-M/Forecast.
5. Save the changes
6. Restart

I hope it will help some1 :)

User avatar
Venky
Nouveau
Nouveau
Posts: 16
Joined: 03 Dec 2006 12:00

How to setup Control-M Forecast

Post by Venky » 07 Jul 2007 3:19

Can you please assist me as to what is the cost of setting up Control-M Forecast in 6.2.1 . Please reply ASAP.

Venky

User avatar
mauriziog
Nouveau
Nouveau
Posts: 807
Joined: 08 Jun 2007 12:00
Location: Varese - Italy
Contact:

Post by mauriziog » 24 Jul 2007 5:30

1) The cost in money is about 1/10 of your licence.

2) The cost in time is very little: is a EM server component, very little; for installing and configure in a existing control-m system was about 1 hour.

3) using it is simple for the calendar utility, and medium for doing the future previsions.

Is a very usefull and I advise it.

User avatar
Eric01
Nouveau
Nouveau
Posts: 4
Joined: 17 Feb 2009 12:00

Forecasting on ZOS...

Post by Eric01 » 19 Feb 2009 2:26

How I could select all tables (just like when we use the *), actually I run a test but just with 5 tables and runs perfectly. But there are 6000 tables, how I can manage???

Reggars.

Post Reply