I have one job (check of ctmagents ) which stops to be cyclic when it is end not ok.
So I have to restart manually every time it’s failed.
Can I build a option so that when its failed, it will start automatically? (like a script/or option in CtrlM)
Do u have any idea how I can manage it?
As soon as it’s failed, I should normally have an in Alert for investigation.
Do u have any idea how I can manage it?
Many thanks
Question /IT Production/Urgent
Steph,
it seems you have asked this same question on mutiple posts.
Ejtoedtli's answer on your first post
As he indicated he does not speak french and neither do I used google translate to get the following from his reply to you.
"La commande STOP CYCLIC est votre problème. Vous dites au travail pour arrêter l'exécution comme cyclique. Si vous souhaitez obtenir cet emploi de continuer à fonctionner sur le cycle régulier, peu importe si elle est réussie ou non, alors vous devez supprimer la commande STOP CYCLIQUES de JOB."
Hope this helps
it seems you have asked this same question on mutiple posts.
Ejtoedtli's answer on your first post
As he indicated he does not speak french and neither do I used google translate to get the following from his reply to you.
"La commande STOP CYCLIC est votre problème. Vous dites au travail pour arrêter l'exécution comme cyclique. Si vous souhaitez obtenir cet emploi de continuer à fonctionner sur le cycle régulier, peu importe si elle est réussie ou non, alors vous devez supprimer la commande STOP CYCLIQUES de JOB."
Hope this helps